Scenario:
The locating procedure described here assumes you are
(a) facing away from the drill rig, toward the bore path, (b)
the transmitter is below ground and between you and the
drill rig and (c) the FLP is behind you.
The arrows in the receiver screen indicate the direction of
the closest locate point (1). The right-left bar (2) is used to
fine tune the location of the locate point. In the above
illustration, the FLP is the closest locate point and it is
behind the operator (3).
Drill Rig
Bore Path
Actual position of receiver
to transmitter
Receiver view
Page 33
