Underhill Tracker Assembly and Operation Instructions
11
Locate the Pull Rope Release Mechanism
Open the red cover to expose the interior of the Tracker. There is a large brass knob on
the side of the pull-rope drum. Note how the brass knob has to parallel flat sides see
Figure 11-1.
Pull Rope Release Mechanism
Figure 11-1
Pull the knob outward while simultaneously twisting in a clockwise or counter-clockwise
manner to release the spool from the gear drive. Pull out the desired amount of pull
rope and attach the loose end to the ground stake.
Confirm the pull-rope has some tension on the drum before the release
mechanism is locked. Any slack could cause the Tracker to automatically shut-
off prematurely.
Locate the Auto Shut-off
Close the red plastic cover and locate the black, rectangular auto shut-off knob on the
front of the Tracker as shown in Figure 11-2.
Auto Shut-off
Figure 11-2
The auto shut-off knob is connected to a valve that will automatically stop forward
travel of the Tracker when it reaches the end of the pull-rope.
!
Locked Position
Unlocked Position
Parallel
Flat edges