Bulleyts 316L Stainless Steel
3DUW'HVFULSWLRQ
3DUW1R
1: Projector cable
S00111
2: Projector lid complete
S00C102
3: "O" Ring
00108
4: Projector case
00101
5: Lamp (150w HQI)
91004
6: Reflector
91791
7: Connecting ring
000C03
8: Gaskets
000C07
9: S.S. M6 socket screws
93306
10: Glass retaining ring
000C04
11: Gaskets
000C02
12: Glass
000C01
13: Electronic ballast-120v S00801-120
13: Electronic ballast-230v S00801-230
/(16),77,1* ,16758&7,216
Check the glass landing surface is clean and apply a suitable silicone grease to the gaskets. Fit
the glass, gaskets and retaining ring as shown above. Hand tighten the screws with a 5mm
“Allen key” making sure the glass retaining ring is square. Torque the screws to
Nm (
ft/lbs)
LQ
the sequence shown, check the ring again and re-torque the screws again to the same setting.
ORDERING NUMBER FOR 120 VOLT AND 230 VOLT MODELS
A00310-120, A00324-120, A00338-120, A00350-120
A00310-230, A00324-230, A00338-230, A00350-230
FLUSH - A00310
0-24 DEGREE - A00324
24-38 DEGREE - A00338
50 DEGREE - A00350
1
2
3
4
5
6
(/(&75,&$/ ,1)250$7,21
Cable specification from electronic ballast to projector (Pt.No. S00111)
Shielded 3 core, Temperature -60C to +180C, Voltage 2000 volts.
Maximum distance between ballast and projector with the shield
earthed 20 meters.
120 volt 150 watt ballast - running current 1.5 amps
230 volt 150 watt ballast - running current 0.75 amps
5HFRPPHQGHG6SDUHV
3DUW1R
Lamp (150w HQI)
91004
Glass with gaskets
S00C01-2
Electronic ballast-120v S00801-120
Electronic ballast-230v S00801-230
The Bulleyt is serviced from inside the hull. Allow access
for maintenance and space for ventilation.
Do not use the Bulleyt in dry-dock or out of the water.
Allow a minimum of 70mm behind the projector lid
(item 2) for lamp replacements.
Do not attempt to remove the glass lens while afloat.
The projector must be correctly assembled with lid
and secured to the Bulleyt whilst afloat.
23(5$7,21$/ &21',7,216$1'&216,'(5$7,216
ELECTRONIC BALLAST COMPLETE
WITH ALUMINIUM ENCLOSURE -S00800-120 OR 230
PLEASE REGISTER YOUR PRODUCT WARRANTEE DIRECT TO
:::5(*,67(58:/&20
FOR TECHNICAL INFORMATION PLEASE EMAIL
7#81'(5:$7(5/,*+76&20
SALES, PRODUCT INFORMATION AND NEWS GO TO
:::81'(5:$7(5/,*+76&20
%8//(<7
(41/61
