Introduction:
Congratulations on the purchase of your new thru-hull LED underwater light. The platform for the SV10 LED is based upon our
time-proven thru hull SV10 HID housing. Underwater Lights
®
USA, LLC takes pride in providing well designed, high quality and
thoroughly tested lights that allow you to “enhance your boating experience”. These lights can be installed on your vessel for
aesthetics, to attract fish and/or for security and safety.
General Information:
The latest commercial grade “COB” High-Density Light Emitting Diode (LED) technology used in this light will provide robust and
reliable operation under normal operating conditions when used with the matching Underwater Lights
®
USA, LLC driver box.
The internal parts for the SV10 LED can be retro-fitted into an SV10 HID housing. Please see the matching SV10 LED retrofit
manual for details.
The SV10 LED is intended for use on fiberglass and wood hulled vessels.
The main body is designed and tested to act as a cofferdam for added security.
Depending upon water clarity conditions, the light beam can reach up to 30 meters (100 feet).
Safety Information:
Never try to install or remove the SV10 while the vessel is in the water.
Upon proper installation, the SV10 requires bonding to the vessels grounding and cathodic protection system.
Always disconnect and lock-out power before working on light.
Care and Maintenance:
The SV10 should be inspected for moisture every six months by removing the projector lid and inspecting internal components. This
can be accomplished while the vessel is in the water.
The SV10 electrical cabling and driver box should be visually inspected for proper operating condition every six months.
Marine growth should be removed from the glass using a soft brush to allow both heat and illumination to properly exit the light.
Technical Specifications:
Light source = Instant-on high flux, high density LED array - 21,685 maximum Lumens and 6500 Kelvin color temperature in White
- Available in White, Blue, Green, RGB or RGBW changing LED array’s - 40,000+ hours life - Internal thermal limit and reverse
polarity protection included
Lense = Borosilicate glass - 12.7mm (0.5”) thick - 58mm (2.3”) diameter net aperture
Overall Dimensions = 130mm (5.12”) diameter x 254mm (10”) long - 6.9 kilograms (15.2 pounds)
Construction = Marine bronze and black anodized marine aluminum alloy
Power supply = VAC to driver box and VDC to SV10 LED (See matching Underwater Lights
®
USA, LLC driver box specifications)
Troubleshooting:
Please contact our Florida technical support staff at 1-954-760-4447 or French technical support staff at +33 (0) 497 21 0296,
Monday thru Friday from 8:00 am to 5:00 pm local time.
Warranty:
Underwater Lights
®
USA, LLC warrants this light to be free from defects in workmanship and materials for a period of two years
from the date of original purchase. Further, misuse, abuse, improper installation, neglect, improper shipping, damage caused by
disasters such as fire, flood and lightning, unauthorized repair or modifications will void said warranty. Should your light prove
defective during the warranty period, promptly contact Underwater Lights
®
USA, LLC for an RMA number and then return the light
freight prepaid with the RMA number clearly marked on the outside of the shipping container.
Underwater Lights USA, LLC
Underwater Lights Europe Sarl
3406 S.W. 26
th
Terrace, C 6/7
16, rue Rouaze
Fort Lauderdale, FL 33312 USA
06400 Cannes, France
Phone: 1-954-760-4447
Phone: 33-(0)-4-97-21-02-96
Fax: 1-954-525-3261
Fax: 33-(0)-4-97-21-10-96
Internet: www.seavision.com
Internet: www.seavision.com
Email: sales@seavision.com
DOC:062212-5
Email: sales@seavisioneurope.com
SV10 LED
Underwater Light
Thru-Hull Mount, LED Array
