SV18 Driver Box
Underwater Lights Europe Sarl
16, rue Rouaze
06400 Cannes, France
Phone: 33-(0)-4-97-21-02-96
Fax: 33-(0)-4-97-21-10-96
Internet: www.seavision.com
Underwater Lights USA, LLC
3406 SW 26th Terrace, C-6/7
Fort Lauderdale, FL 3331
2
USA
Phone: 1-954-760-4447
Fax: 1-954-525-3261
Internet:
www.seavision.com
Email:
sales@seavision.com
DOC:092205-5
Email: sales@seavisioneurope.com
MODEL 12G32L, 120-230VAC
BALLOON
PART
DESCRIPTION
1
18032
ENCLOSURE
2
18003
TERMINAL BLOCK MOUNT
3
18004
CABLE STRAIN RELIEF
4
18005
BLANKING PLUG
5
18030
DRIVER
6
18008
FUSED TERMINAL BLOCK
7
18013
FAST BLOW FUSE
8
18011
M3.5 x 0.6 x 12LG PPHS
9
18031
M4 x 0.7 x 6LG SST PPHS
120-230VAC
Installation:
The driver box should be mounted in a cool, dry, well ventilated and easily accessible location. Attach the driver box to a fixed
bulkhead or similar secure structure using appropriate M6 fasteners with adequate space between driver boxes for proper cooling.
Note: Whereas the driver box can be placed in any orientation, it is recommended that the cable strain relief connectors face down.
Using marine grade cable, run a VAC input line into the driver box and secure by way of one cable strain relief connector.
Run cable supplied with the thru hull LED light to the driver box and secure by way of one strain relief connector. Caution! Avoid
making tight bends and/or passing cables over sharp edges/surfaces.
Connect cable leads to the driver box fused terminal block as shown in the wiring diagram below.
Serviceable Parts:
Upon opening the driver box by unscrewing four captive lid fasteners, replacement of driver or fused terminal block is accomplished
by removal and replacement of associated fasteners and wiring. Further, a 10 Amp fuse located in the terminal block may be
pulled out and replaced as required.
Caution! Ensure that VAC power is disconnected and locked out before servicing driver box.
