11
EYEXO INSTALL GUIDE
1
Take out the Ethernet LAN
cable from the box. Connect
the end with the tag that
reads “Connect this side of
LAN cable to Sensor ONLY”
to the sensor. Connect the
other end DIRECTLY to your
PC ethernet port and NOT a
switch.
2
Take out all 3 components
of the power source: power
cable, power adapter, and
power connector. Connect all
3 accordingly and connect the
“Power Connector” end directly
to the sensor as shown below.
Turn on red switch.
3.3 Hardware Install - Continued
Step 3: Connection
Ethernet LAN
Cable
Power Cord
Power Adapter
Power
Connector
Necessary Parts
Hardware