ITEM NO.: BD-2038
REVISED OCT 09, 2018
Printed in Vietnam
- 7 -
STEP 4
Attach knobs (1) to front of drawers and door with pan head screws (2), as shown below. Tighten with a
screwdriver.
STEP 5
Attach steel bands (6) to the unit with screws (4) as shown below.
(to secure the product to the wall and reduce the risk of tipping over).
Important!
Properly attach steel bands (6) to the wall in an area of
drywall or plaster with a wood stud:
Mark the attachment point(s) with a pencil at the appropriate height
positioned over the wood stud(s)
in the wall
.
Drill 1/8-inch (3mm) diameter hole(s) into the wood stud(s) located in the wall, w here you marked
with the pencil.
Properly attach steel bands to the wall with screws (3) and tighten screw(s) firmly into the wall.
