ITEM : S-6173
ISSUED OCT 07, 2014
Printed in Vietnam
- 3 -
HARDWARE LIST
When unpacking, please carefully not to discard any parts with the packaging. Before continuing,
please make sure you have all of the following hardware:
NO
Description
Qty
Sketch
NO
Description
Qty
Sketch
1
Short bolt
( M6 x 35mm)
2
2
Long bolt
(M6 x 60mm)
8
3
Screw
(M4 x 35mm)
10
4
Lock Washer
(
6.5 x 11mm)
10
5
Flat Washer
(
6.5 x 19mm)
10
6
Allen Key
(4x80mm)
1
STEP 1
Attach seat frame (B) to the back (A) by using bolts (2), washers (4) and (5), as shown below . Tighten
with Allen key (6).
Attach Side Stretcher (E) to the back (A) by using bolts (1), washers (4) and (5), as shown below.
Tighten with Allen key (6).
Note: DO NOT tighten any of the bolts, until the stool is assembled, then put on a flat level surface to
make sure the chair is level and then tighten the bolts.
