ITEM NO.: CC-105
ISSUED MAY 10, 2018
Printed in Vietnam
- 4 -
STEP 1
Attach side aprons (C) to the back (A) with bolts (1), and washers (4) and (5) as shown below.
Tighten with Allen key (7).
Note: DO NOT fully tighten any of the bolts, until the chair is assembled, then put on a flat level
surface to make sure the chair is level and then tighten the bolts.
STEP 2
Attach front frame (B) to side aprons (C) with bolts (2) and curve washers (6), as shown below.
Tighten with Allen key (7).
