11
MANUALE UTENTE
4. Components Description
4.1 Display (fig. 12)
fig. 12
- Display
Lights up when chrono thermostat is active
Lights up when spark plug is activated
Lights up when auger motor is functioning
Lights up when the contact of the external thermostat is closed or shorted
Lights up when remote control signal is being received
Lights up when the smoke expulsion motor is active
Lights up when the circulating water pump is activated
Lights up when forced-air heating is activated
Lights up whe the thermostove is in the heating mode
Blinks whenever domestic hot water is being used. If it lights up even in heating
mode, please contact technical support.
• Turn the thermostove on and off with
the key
4
;
• Access with the key
3
to program-
ming functions;
• Use the keys
1
and
2
to change the
values in the lower window
D2
;
• With the keys
5
and
6
you can chan-
ge the heating power, its value shows
the window
D1
;
• All the messages are shown in the
windows
D1
and
D2
.
4.2 Forced-air heating
The user can turn on the forced-air hea-
ting and it is automatically regolated by a
probe.
The air heating activates when the tem-
perature in the room shown on
D1
is less
than
SET Air
:
• Press twice the key
SET
: “
Set Air
”
and the temperature to regulate will
appear on the display
(fig.13)
;
• With the keys
1
and
2
set the value;
•
Confirm with the key SET
.
Summary of Contents for BiFuel en ELS34
Page 1: ...USER S MANUAL...
