www.ungerglobal.com
www.ungerglobal.com
www.ungerglobal.com
16
17
ENGLISH
H
I
F
LO
™ RO-M
OBILE
Safety regulations
1 Safety regulations
1.1 General
Please observe the applicable rules and regulations, as well as the effective ac-
cident prevention regulations.
We are not liable for any occurring water damage.
The fed water must comply with the specifi cations of the German Drinking Water
Ordinance. When operating with water other than from drinking water system, e.g.
from a well, a water analysis must be performed prior to application to determine if
the water is suitable.
Once the system is switched off, it can remain shut down for a maximum of 7
days without operation, otherwise the fi lter must be prepared for storage with
amembrane protection agent or the system must then be fl ushed with clear wa-
ter.
The fi lter element of the pre-fi lter should be replaced according to the level of
contamination, at the latest however every 6 months.
Recommendation: Install an external residual-current circuit breaker between
the power supply in order to exclude risks as a result of surges. These are
available from specialist retailers.
1.2 Intended use
This system may cause danger if it is improperly installed, not regularly maintained
or not used as intended.
The system is applied for desalination of drinking water.
The concentrate of the reverse osmosis system produced in this process must be
drained.
Cannot be used to remove bacteria.
The system is not approved for the US American market.
1.3 Shelve life
In the manufacturing facility, the reverse osmosis systems receive a date of
manufacturing, which is indicated on a type plate, and a membrane protection
agent is applied to the osmosis modules. It is recommended to change the mem-
brane protection agent approx. once a month to ensure maximum performance.
The system must be protected against frost. The temperatures in the service
room must be at least 5°C (max. 40°C).
H
I
F
LO
™ RO-M
OBILE
Table of contents
1 Safety regulations ....................................................................................................... 17
1.1 General ..................................................................................................................... 17
1.2 Intended use ............................................................................................................. 17
1.3 Shelve life ................................................................................................................. 17
1.4 Operating temperatures, pressures and connections ............................................ 18
1.5 Protection types of electric RO components .......................................................... 18
1.6 Conversions and modifi cations to the device ......................................................... 18
2. General information on reverse osmosis ................................................................. 19
2.1 Function of reverse osmosis ..................................................................................... 20
3. Technical Data ............................................................................................................ 21
3.1 Scope of delivery ...................................................................................................... 21
4. Shipping & packing .................................................................................................... 22
4.1 Receiving inspection ................................................................................................ 22
4.2 Claims. ....................................................................................................................... 22
5. Start-up. ...................................................................................................................... 22
6. Description of use of the osmosis system ................................................................ 24
6.1 Switching off the system ......................................................................................... 25
6.2 Maintenance & care ................................................................................................. 25
6.2.1 Filter cartridges ..................................................................................................... 25
6.3 Anti-freeze protection ............................................................................................. 25
7. Preparation of the fi lter for storage ........................................................................ 26
8. The integrated resin fi lter ......................................................................................... 27
9. TDS meter .................................................................................................................. 28
10. Pump control system ............................................................................................... 28
We thank you for your decision to purchase our product. To ensure many years of
enjoyment, we ask you to follow the instructions provided for the use and operation
of the system. We reserve the right to make technical changes.
