www.ungerglobal.com
www.ungerglobal.com
1
Unger Enterprises, LLC
425 Asylum Street • Bridgeport, CT 06610
Tel.: 800 431 2324 • Fax: 800 367 1988
unger@ungerglobal.com
Lit. # 21496
At Unger, we aim to stand apart from the
rest thanks to our special “Yes We Can!”
service spirit. We love what we do and
as proof of that, we promise to deliver a
100% Customer Satisfaction Guarantee
on every product and service we offer.
4
STORAGE:
Do not store resin in
open or unlabeled containers. Store
in a cool, dry place (15°F to 100°F).
DISPOSAL:
Dispose of in
accordance with applicable
federal, state/provincial, and local
regulations. All HydroPower Ultra
units require the use of mixed bed
ion exchange resin (commonly
referred to as de-ionizing resin)
DANGER
!
• Spilled resin is a slipping hazard. Clean up spilled
resin immediately.
• Resin can cause skin irritation.
• Avoid skin contact.
• Wash hands thoroughly after use.
• Can cause eye irritation. Avoid eye contact.
Wear safety goggles. In case of eye contact,
immediately flush eyes thoroughly with clean
water. Consult doctor if symptoms persist.
• Do not drink the water produced by this system.
READ OPERATING INSTRUCTIONS BEFORE
USING PRODUCT!
Contents under pressure can cause severe injury or
death from tank rupture.
When starting system:
• Do not exceed pressure of 116 psi (8 Bar).
• Check system for cracks.
• Be sure cover is in locked position.
• Keep Water OUT connection open and hold yellow lever
down to remove trapped air from system.
• For use only with drinking (tap) water.
Before servicing system:
• Shut off tap water supply and open Water OUT connection.
• Disconnect water supply and allow tank to drain.
• Before opening tank, Press yellow FastLock™ opening
lever to remove pressure the tank, rotate handles counter-
clockwise 1/8 turn, and remove top cap using handles.
