www.ungerglobal.com
ENGLISH
5
HydroPower® Ultra
Introduction
1. Introduction
When choosing UNGER complete desalination as water treatment system, you have
decided in favour of a high-quality product.
Complete desalination is based on the principle of ion exchange. The minerals
responsible for producing hardness and the conductivity (TDS value) are removed from the
water.
The application of this treatment filter has the following advantages:
• A water fed pole and a brush are all that is needed for glass cleaning.
• Prior to system installation and start-up it is essential that you observe the safety
regulations and instructions for installation and maintenance contained in these
instructions.
• The manufacturer is not liable for the malfunction of the device:
• When handling is not in compliance with regular use.
• When used for applications not mentioned in the manual (use other than intended),
• When failing to comply with safety regulations.
There is a risk of damage to the treatment filter if:
• Operating and installation errors.
• Usage of loose resin (Overfill, expansion of resin, resin flows into waterline)
• Vessel is opened incorrectly.
• Replacing spare parts that are not included in the official UNGER spare parts pricelist.
• Performing unauthorised modifications to the design.
• Non-compliance with safety regulations (e.g. anti-freeze protection).
• Use of chemical additives.
• Insufficient maintenance.
Use only original spare parts by UNGER (according to spare parts list).
For all inquiries and spare parts orders it is important to provide detailed information on
the device.
