Installation &
Operating Instructions
Introduction
Thank you for choosing nLite HydroPower
TM
for your purewater needs.
You have chosen a high quality product backed by Unger’s 100% customer
satisfaction guarantee. When used as intended, the nLite HydroPower unit will
produce commercial grade zero TDS purewater for site glass cleaning and other
applications that utilize deioinized water.
The production of purewater, or deionization, is based on the principal of ion
exchange. In this process, the minerals responsible for producing hardness and
conductivity (TDS values) are removed from the water.
The use of nLite HydroPower has the following advantages:
• A waterfed wash pole and brush will effectively clean glass and other surfaces
without the need for chemicals.
• Run-off does not have to be remediated, and is safe for plants and animals.
• No electricity or external power supply needed – system works with plumbing
line pressure.
• nLite HydroPower units are made with high strength plastic and can withstand
excessive water hammer pressure spikes.
• QuickChange
TM
resin bags are factory filled with the precise amount of
premium grade mixed bed DI–Resin for optimum system performance.
As with any commercial equipment, care must be taken when operating and
servicing the unit. There is a risk of damage to the system due to:
• Operating and installation errors.
• Use of loose resin (overfill and expansion of resin will damage unit).
• Vessel is opened incorrectly.
• Using non Unger spare parts.
• Performing unauthorized modification to unit.
• Insufficient maintenance.
Use only original spare parts by Unger (according to spare parts list, pg. 13).
For all inquiries and spare parts orders, it is important to provide detailed
information located on the device.
3
