3
MANUAL - SPRAY GUN CLEANERS - UG7500 SERIES
REVISION 2011-05
INTRODUCTION
Uni-ram holds many patents on designs used in its innovative products. Every machine is rigorously
tested for compliance with stringent Quality Assurance standards. Follow the directions in this manual
under Setup, Operation and Maintenance in order to operate this machine safely and effectively. Not
following these instruction can lead to malfunction or damage to the machine. Follow directions under
the section below,
Cautions and Warnings
, and on labels attached to the machine. Ensure that the
manual is readily available for the operator at all times. If you have any questions about the operation
of this machine, call your distributor or a Uni-Ram Service Engineer.
CAUTIONS AND WARNINGS
•
Always disconnect this machine from power sources before performing maintenance
•
Do not smoke or use near open flames, sparks or heat.
• Ground pails and cabinet using supplied grounding wires
Basic UG7500 Model has the following features
• Auto Wash, Clean rinse and air purge
• Manual Wash - Brush and Rinse - Flexible Spigot
• Three Diaphragm Pumps and Rinse Pumps
• Hand free - Foot pedal Operation
• Manual and Automatic Fume exraction
• Clean 2 Guns and 2 Cups (2 Nozzles and 14 Jets)
• One Pail
• Hood - Stainless Steel
North America:
Uni-ram Technical Service
1-800-417- 9133
Other Continents:
Contact Your Supplier
