6
MANUAL - UG7500W SERIES SPRAY GUN CLEANERS
REVISED 2020-10
Pre clean Fluid
Passageway
PRE-CLEAN - DISPOSABLE CUP
Disconnect the spray gun from the air hose.
• Squirt water into the disposable cup adapter, shown
in photo on far right.
• Pull the gun’s trigger to fl ush the water through the fl uid
channel and into the paint waste container (not supplied)
for later disposal.
.
PRE-CLEAN - CONVENTIONAL CUP
Disconnect the spray gun from the air hose.
• Disconnect the cap and pour the paint waste into a paint waste
container (not supplied).
CLEANING SPRAY GUNS AND CUPS
• Remove digital air gauge if so equipped.
• Loosen the air cap of the spray gun two full turns.
• Lock the trigger in the open position with the Trigger Lock Spring.
See photos below.
Remove
Gauge
Trigger Lock Spring
Trigger Lock Spring
On Spray Gun
