9
MANUAL - UG7500W SERIES SPRAY GUN CLEANERS
REVISED 2020-10
PREVENT Water FROM ENTERING THE AIR PASSAGE OF SPRAY GUN:
•
Insert the plastic plug into the air fi tting as in the photo below.
•
Positive air will fl ow through the passage way during cleaning.
• If you disconnect the air plug from your spray gun attach the knurled nut on the chain with the trigger
lock spring to the air passageway of the spray gun.
CLEANING CYCLE:
• Close the lid of the spray tank and turn the "Auto Wash Timer" clockwise. See photo below. The
wash cycle takes about 60 seconds.
• Push and hold the "Air Rinse" button for about 5 seconds to evacuate the wash water and air rinse the spray
guns. See photo below.
• Press and hold the "Clean Rinse" buttom for about 5 seconds to send 100 cc of clean water through the jets to
rinse the the spray guns. See photo below.
Air Plug inserted into the Air
Passage way of the spray gun
Auto Wash Timer
Air Rinse
Control of fl ow
for Spigot
Control of fl ow
for Flow-Through
Brush
Clean Rinse
