Owner’s manual
14
EN
VI. Transistor hFE measurement (see diagram 7)
1)Turn rotary switch to “hFE”.
2) Put the muItiple purpose socket into the terminal.
3) Check the transistor is either PNP or NPN, assembles or SMT,
then connect the transistor to be measured to the corresponding
jacks.
4) LCD display hFE reference value. The testing requirement:
basic current 10μA,Vce for 2.3V.
Warning:
• To avoid damages to the Meter or to the devices under test,
do not input any current over 60V DC or 30V AC.
• Take off the multi-purpose socket after the measurement.
Diagram 7
