6.
CH3 Output
The CH3 has 4 sets of fixed outputs which are 1.8V/2.5V/3.3V/5.0V/3A, which can be fine
adjusted by OUTPUT button. By pressing the CH3 button, the output voltage can be switched
between 1.8V/2.5V/3.3V/5.0V and the corresponding indicator will be on. Double press the CH3
button, the cursor will flash on CH3 voltage and can be fine adjusted.
The shutdown has a memory function. The last set value will be restored when the device is
started up next time.
The CH3 operation and display interfaces are as follows:
7.
M1-M5 Store/Recall Functions Introduction
After output parameters are set, long press one of the M1-M5 buttons (>3s) to save the setting.
Short press one of the M1-M5 buttons to recall the stored data with the button’s backlight on.
