10.
SET VIEW Introduction
When the power output is on, the voltage and current displayed on the LCD are the real-time
sampling output values.
Press SET VIEW button (backlight on) to view the voltage and current set values.
Press SET VIEW button again (backlight off), the LCD redisplays the real-time sampling output
voltage and current.
11.
Buzzer On and Off
Press the BEEP button (backlight on), the buzzer will be on; long press the BEEP button for 3s, the
buzzer will be off.
With the shutdown memory function, the last saved settings can be restored when the device is
started up next time.
When the buzzer is enabled, it beeps for example:
Power on/off
CH1/CH2 setting switching
Independent - series - parallel switching
Output on/off
OVP/OCP setup and on/off
Pressing the voltage/current knob
SET VIEW (setting/output) display switching
LOCK/UNLOCK operation
Panel lock/unlock
CH3 output selection
12.
Buttons Lock
Short press the LOCK button, the button backlight is on and the buttons on panel are locked.
Long press the LOCK button (>3s), the button light is off and the buttons on panel are unlocked.
