Function Introduction
1.
Voltage / Current Setting and Output
Voltage setting: Press CH1 button, the cursor will flash on the CH1 voltage position, press
the voltage knob to move the cursor and rotate the knob to adjust the voltage value;
Current setting: Press CH1 again, the cursor will flash on the CH1 current position, press the
current knob to move the cursor and rotate the knob to adjust the current value.
Press CH2 to set the CH2 voltage and current values with the same method above.
Press the OUTPUT button to enable CH1, CH2 and CH3 outputs after voltage and current
setting.
With the shutdown memory function, the last set value can be automatically restored when
the device is started next time.
The operation and display interfaces are as follows:
