Measurement Operation(8)
F
.
Temperature Measurement (UT202 Only)
(see figure 8)
The temperature measurement ranges are -40
o
C~1000
o
C
and -40
o
F~1832
o
F.
To measure temperature, connect the Meter as follows:
1. Insert the red temperature probe into the
V
Ω
terminal and the black temperature probe into the
COM
terminal.
2. Set the rotary switch to
o
F
o
C and press
SELECT
button
to select
o
F or
o
C measurement mode.
o
C measurement
mode is default.
3. Place the temperature probe to the object being measured.
The measured value shows on the display.
red black
( figure 8)
Note
l
The Meter automatically displays the temperature
value inside the Meter when there is no temperature
probe connection.
l
When temperature measurement has been completed,
disconnect the connection between the temperature
probe and the circuit under test, and remove the
temperature probe away from the input terminals of
the Meter.
Model UT201/202: OPERATING MANUAL
22
