UT3500 series
User Manual
43
the bottom of the screen to enter the < SYSTEM CONFIG> page;
2. Use the cursor keys to move the cursor to the [Date] or [TIME] field;
3. According to your own needs, press the function keys at the bottom of the screen to
select the year, month, day, hour, minute and second that you want to set. + means
the value plus 1 and - means the value minus 1. For example, year+, month+, day+,
hour+, , and represent +1 year, +1 month, +1 month, +1 hour, +1
minute, and +1 second respectively
and vice versa.
8.1.4 Account Setting
The instrument has two user modes for selection:
Administrator - Except for the [SYSTEM SERVICE] page, other functions are open to the
administrator, and the parameters set by the administrator are saved in the system memory
after a delay of 5 seconds, so that they can be loaded after the next startup.
User - In addition to the [SYSTEM SERVICES] and [CATALOG] pages, the user can
operate other functions, and the data modified by the user will be restored to the value set
by the administrator after the next startup.
Setting Steps:
1. Press the [Test] or [Setup] key, and select [SYSTEM CONFIG] with the function key at
the bottom of the screen to enter the < SYSTEM CONFIG> page;
2. Use the cursor keys to move the cursor to the [ACCOUNT] field;
3. According to your own needs, press the function key at the bottom of the screen to
select administrator or user;
4. Regarding the account password, you can choose to delete the password and the
administrator will not be protected by the password, or you can choose to change the
password and enter a numeric password up to 9 digits, and the password only includes
numbers and symbols.
8.1.5 [Remote Communication] Setting
The instrument has built-in RS-232 interface and USB communication interface, [REMOTE]
allows you to choose one of them.
If you choose RS232 interface, please insert the communication cable into the RS-232C
interface on the rear panel of the instrument. If you choose the USB interface, please insert
the communication cable into the USB interface on the rear panel of the instrument.
Setting Steps:
1. Press the [Test] or [Setup] key, and select [SYSTEM CONFIG] with the function key at
the bottom of the screen to enter the < SYSTEM CONFIG> page;
2. Use the cursor keys to move the cursor to the [REMOTE] field;
3. According to your own needs, press the function key at the bottom of the screen to
select RS-232 interface or USB communication interface.
