Operation of Hold Mode
Warning
To avoid possibility of electric shock, do not use
Hold mode to determine if circuits are without power.
The Hold mode will not capture unstable or noisy
readings.
The Hold mode is applicable to all measurement functions.
l
Press
HOLD H
to enter Hold
mode; the Meter beeps.
l
Press
HOLD H
again or
RANGE
or turn the rotary
switch to exit Hold mode; the Meter beeps.
l
In Hold mode,
is displayed.
Full Icons Display
If the Meter is turned on with
HOLD H
being pressed
on, the LCD will display all the icons and maintain this
mode until the LCD enters normal display mode when
the
HOLD H
is pressed again.
Sleep Mode
l
To preserve battery life, the Meter automatically
turns off if you do not turn the rotary switch or press
any button for 10 minutes.
l
The Meter can be activated by turning the rotary
switch or pressing any button other than
.
l
The Meter will display the last measurement value
before it entered Sleep Mode if it is activated by
pressing any button other than
and it was not in
the continuity measurement mode before it entered
Sleep Mode.
If the Meter is activated by turning the rotary switch,
it will start from the switch selected function.
l
To disable the Sleep Mode, press
Hz
,
RANGE
or
RS232C
button while turning on the Meter.
Model UT60D: OPERATING MANUAL
27
Summary of Contents for UT60D
Page 40: ...Model UT60D OPERATING MANUAL 40 ...
