G. Frequency Measurement
(see figure 9)
Warning
To avoid harms to you, please do not attempt to input
tested frequency’s voltages higher than 30V rms.
To measure frequency, connect the Meter as follows:
28
Model UT803: OPERATING MANUAL
1.
2.
3.
Insert the red test lead into the
Hz
terminal and the
black test lead into the
COM
terminal.
Set the rotary switch to
Hz
0
F
and press
SELECT
button to select
Hz
measurement mode.
Connect the test leads across with the object being
measured. The measured value shows on the display.
(Figure 9)
Summary of Contents for UT803
Page 1: ...Model UT803 OPERATING MANUAL ...
Page 2: ......
