22
It is difficult to clearly identify by what distance the weight should be moved in order to
correct the residual imbalance. It depends on the value of imbalance to be corrected as
well as the dimensions and position of the mounted weight. In general, it can be said
that large weight and residual imbalance requires minor correction of the position.
Note:
If the indicator screen displays 0 (no imbalance), there are no signals regarding the
position of imbalance (no arrows).
It may occur that in subsequent measurements of the wheel imbalance, with the cut-off
threshold set to e.g. 5 g, the results will change as follows:
- first measurement: 0
- second measurement: 6 g
- third measurement: 0
- etc.
The results are not incorrect. The imbalance is certainly close to the nominal value
of the set threshold, i.e. 5 g, and thus the indicator displays alternatively the results
0 or 6. For threshold 10 g, the results may be 0 or 11.
