Compressed air hose drum GB
10190 Operating instructions RU-89560
28
State: 10190-13-2013
1
Introduction
Everybody who uses, cleans or
disposes of this product must be
familiar with the contents of these
Operating Instructions.
These Operating Instructions form part
of this product.
Always observe all safety instructions.
If you have questions please contact
your local agent or the Service
Department (for address see Chapter
12).
2
Use in accordance
with these
instructions
This compressed air hose drum is
intended for universal use in the
workshop, in the garden, for renovation
work or in automotive work. It is
compatible with all current compressed
air devices.
It is not permissible to use the product
for any other purpose than those
described in these Operating
Instructions. This may lead to damage
to the product.
3 Safety
Instructions
IMPORTANT
:
When using the
compressed air hose drum, please note
the following instructions. This will
minimise personal danger or damage to
property.
If there is any damage which is caused
by the non-observance of these
Operating Instructions the guarantee
will become invalid.
No liability will be accepted for any
damage to property, injuries to people,
or consequential damage.
The key words and symbols used in
these Operating Instructions have the
following meanings.
Symbol
Key word / meaning
DANGER:
Non-observance causes
considerable risk of injury to
people and danger to life
WARNING:
Non-observance causes
medium risk of injury to
people
TAKE CARE:
Low risk of injury to people
and danger of damage to
goods or to the product
IMPORTANT:
What you need to pay
attention to
INFORMATION:
Detailed explanations
Tab.1: Symbol table
Danger:
Danger to life and injury if
disregarded.
•
Keep these Operating
Instructions carefully and if
necessary pass them onto third
parties
Keep the instruction manual and
pass it on to the subsequent owner
with the compressed air hose drum.
•
Do not open/tamper with the
compressed air hose drum.
Never open, tamper with or modify
the compressed air hose drum.
•
Check for leak-tightness.
Compare the information on the
type plate that on the compressor.
Make sure that the maximum air
pressure does not exceed the
Summary of Contents for 89560
Page 32: ......
