OPERATING AND MAINTENANCE MANUAL PLOW
- 15 -
3. Operating Manual
3.1 First Start
Before the first start of the machine:
•
read the Operating Manual thoroughly
•
check technical condition of the unit, and in particular, condition of its working parts,
mechanisms protecting tines from overload and the hydraulic system. When finding any
damaged or worn parts, replace them with new ones
•
check tightening of all screws, bolts and nuts. Tighten any loose nuts especially at the
beginning of operation of the machine
•
check fitting of the quick-connectors of the hydraulic hoses of the machine to the sockets
on the tractor
•
check, whether the disc coulters, rollers and spindles (turnbuckles) can rotate without any
jams
•
check the pressure in tyres acc. to the manufacturer’s recommendations
•
check, whether the components requiring lubrication are lubricated
•
check, whether the machine attachment system fits the tractor attachment system
3.2 Preparation of the Unit (T Machine)
•
pressure in the tractor wheels must be equal on the same axle in
order to provide uniform working depth of the machine
•
the tractor lower links (c) must be stiffened (lock the oblong holes)
and at the same height above the ground level
•
set the lifting rods of the tractor links (w) so that you can pull down
the lower links to the height below the hitch axle in order to
achieve the required working depth, while obtaining sufficient
lifting height of the links for transport
•
mount the front axle weights in order to keep balance of the
tractor and the machine
•
quick-connectors of the machine hydraulic hoses must fit the
sockets on the tractor
•
the hitch axle should be in the middle of the machine
•
category of the lower articulated joint of the hitch axle must be
the same on both the tractor and the machine sides!
Fig. 10.
Front axle weight
Fig. 9.
Tractor lifting rod
Summary of Contents for Plow B Series
