OPERATING AND MAINTENANCE MANUAL PLOW
- 19 -
Adjustment on the packer roller consists in inserting of the pins
(A)
into the appropriate holes
(B)
,
thanks to which, you can raise/lower the machine roller.
•
rest the roller on a stable support, so that you can remove the pins
(A)
•
unlatch and remove the pins
(A)
•
set the roller position
•
insert the pins into the matching holes
(B)
•
secure the pins with cotter pins
3.5.2 Adjusting the 3m C Harrow
Fig. 15.
Adjusting the 3m C Harrow
Adjustment of the PLOW 3m C harrow consists in inserting of the pins
(A)
into the appropriate holes
(B)
, thanks to which, you can raise/lower the harrow. In addition, level the harrow with the
turnbuckle
(C)
•
rest the harrow on a stable support, so that you can remove the pins
(A)
•
unlatch and remove the pins
(A)
•
set the harrow position
•
insert the pins into the matching holes
(B)
•
secure the pins with cotter pins
•
level the harrow by turning the turnbuckle
(C)
accordingly
Level the harrow with the trurnbuckle after each change of the working depth.
Summary of Contents for Plow B Series
