Introduction
The switch provides the seamless network connection. The PoE ports (Port1~4) can automatically detect and
supply power with those IEEE 802.3af/at compliant Powered Devices (PD). The electrical power is transmitted
along with date in one single cable allowing you to expand your network where there are no power lines or
outlets, where you wish to fix devices such as AP, IP Phones, etc.
It is easy to install and don’t need to configuration. With outstanding performance and quality, the 6-port
10/100Mbps desktop PoE switch is an ideal choice for expanding your home or office network.
Hardware Description
Front Panel
The Front Panel of the switch consists of 6-port 10/100Mbps Ethernet RJ45 Ports. The LED indicators are also
located on the panel.
DIP Switch
The DIP switch located on the left panel.
Default mode:
When Extend closed the factory default mode can normal communication between port 1~6.
Extend:
1-4 port can be isolated each other but 1-4 port can connect to 5, 6 ports after open extend to stop
broadcast storm to increase forwarding rate of frame. The extend mode, up to 250m PoE distance allows you to
expand you network via Ethernet cable to where there is no power line or outlet but where you want to fix
device such as IP Cameras.
Note:
After change the mode, in order to make the corresponding configuration take effect you need to manually
restart the PoE switch.