Unibor E3000, Manual

1

4

s

Troubleshooting

Magnet and motor do not function.

-

Damaged or defective wiring.

-

Defective fuse.

-

Defective control unit.

-

Defective power supply.

-

Damaged or defective wiring

-

Carbon brushes are stuck or worn out

-

Defective on / off switch

-

Defective control unit

-

Defective armature and/or field

-

Defective protective reed switch

-

Play in the guide

-

Bent spindle

-

Shaft extending from the motor is bent

-

Pilot bent

-

Bent spindle

-

Shaft extending from the motor is bent

-

Triangular guide not mounted straight

-

Dirt between spindle and the guide

-

Armature Gear ring worn out

-

Gear(s) worn out

-

No grease in gear box

-

Armature damaged

-

Field coil burnt

-

Carbon brushes worn out

-

Damaged or defective wiring

-

Damage to armature or field coil

-

Damaged or defective brushes

-

Guide is set too tight

-

Guide is dry

-

Guide/Rack/Pinion is dirty or damaged

-

Bottom of magnet not clean and dry

-

Bottom of magnet not flat

-

Work piece is not bare metal

-

Work piece is not flat

-

Work piece is too thin less than 3.5mm

-

Defective control unit

-

Defective magnet

-

Damaged / defective wiring

-

Motor seriously dirty

Magnet does function, the motor does not.

Hole cutters break quickly, holes are 

bigger  than the hole cutter.       

Motor running roughly and/or seizing up.

Motor making a rattling sound.

Motor humming, sparks and motor has no force.

Motor does not start or fails.

Guiding takes a great deal of effort.

Insufficient magnetic force.

Frame under voltage.

-

Damaged or defective wiring

- 

Wrong value fuse

- 

Defective magnet switch

- 

Defective control unit

- 

Damaged or defective wiring

- 

Wrong value fuse

- 

Motor running roughly

- 

Defective armature and / or field

- 

Carbon brushes worn out

- 

Defective control unit

- 

Loose or defective gear-rack

- 

Defective rotation system

Fuse blows when magnet switch is turned on.

Fuse blows when motor is started up.

Rotation system free stroke too long.