Unibor E50 FRV Manual
Original Instructions
Nov 2019
5
4) SPECIFICATION
Maximum hole cutting capacity in .2/.3C steel = 2
”
dia. x 2
”
deep
Arbor bore = MT2
Motor Unit
Voltages
120V 50-60Hz
Normal full load
14 A
Electro Magnet
56W
Size
7-
7/8” long
4” wide
Holding Force at 20°C with
1”
minimum plate thickness
The use on any material less than
1”
m thick will progressively
reduce the magnetic performance. If possible, substitute
material should be positioned under the magnet and work
piece to equate to a suitable material thickness. If this is not
possible, an alternative secure method of restraining the
machine MUST be used.
3000 lbs
Overall Dimensions
Height - minimum
22.1/4”
Width (including Capstan fitting)
7.9/16”
Length Overall (including Guard)
12.7/16””
Nett Weight
34lbs
Part No.
E50FRV
Vibration total values (triax vector sum) in accordance with
EN61029-1:
Vibration emission value
a W= 3.562 m/s²
Uncertainty(K):1.5m/s²
Level of sound pressure in accordance with EN61029-1:
LpA: 87 dB(A)
LwA: 100 dB(A)
uncertainty(K)
：
3dB(A)
Ear and eye defenders must be worn when operating this machine. Wear gloves to protect hands when operating the
machine.
These tools are UK designed and manufactured with globally sourced components and conform with the requirements
of EEC Document HD.400.1 and BS.2769/84
Suitable only for a single phase 50-60Hz A.C. power supply
DO NOT USE ON D.C. SUPPLY
Do not use your magnetic drill on the same structure when arc welding is in progress.
D.C. current will earth back through the magnet and cause irreparable damage.
WARNING: THIS APPLIANCE MUST BE EARTHED!
NB: ANY MODIFICATIONS TO THIS MACHINE WILL INVALIDATE THE GUARANTEE
