Unibor EQ35 Manual
Original instructions
Apr 2020
4
Tool use and care
1.
Use clamps or other practical way to secure and support the workpiece to a stable platform.
Holding the
work by hand or against your body is unstable and may lead to loss of control.
2.
Do not force tool. Use the correct tool for your application.
The correct tool will do the job better and safer
at the rate for which it is designed.
3.
Do not use tool if switch does not turn it on or off.
Any tool that cannot be controlled with the switch is
dangerous and must be repaired.
4.
Disconnect the plug from the power source before making any adjustments, changing accessories, or
storing the tool.
Such preventive safety measures reduce the risk of starting the tool accidentally.
5.
Store idle tools out of reach of children and other untrained persons.
Tools are dangerous in the hands of
untrained users.
6.
Maintain tools with care. Keep cutting tools sharp and clean.
Properly maintained tools, with sharp cutting
edges are less likely to bind and are easier to control.
7.
Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may
affect the tools operation. If damaged, have the tool serviced before using.
Many accidents are caused by
poorly maintained tools.
8.
Use only accessories that are recommended by the manufacturer or your model.
Accessories that may be
suitable for one tool, may become hazardous when used on another tool.
Service
1.
Tool service must be performed only by qualified repair personnel.
Service or maintenance performed by
unqualified personnel could result in a risk of injury.
2.
When servicing a tool, use only identical replacement parts. Follow instructions in the Maintenance
section of this manual.
Use of unauthorized parts or failure to follow Maintenance Instructions may create a
risk of electric shock or injury.
WARNING!
Always use safety chain.
Mounting can release.
3) INFORMATION PLATE SYMBOLS
1 2 3 4
2
3
4
1.
Refer to the user manual for operational and safety issues with regard to this machine.
2.
Dispose of the machine and electrical components correctly.
3.
Eye protection must be worn when operating the machine.
4.
Ear defenders must be worn when operating the machine.
