27
⌂
MAINTENANCE & REPAIRS
►
Cleaning
- REMEMBER TO REGENERATE THE WATER TREATMENT SYSTEM PERIODICALLY.
- DO NOT USE ABRASIVE CLEANERS OR SCOURING PADS. DO NOT USE CLEANERS CONTAINING
BLEACH OR COFFEE DETERGENT.
-THE MACHINE SHOULD BE DESCALED ONLY BY A QUALIFIED TECHNICIAN.
♦
After each use
♦
Steam outlet tube
After each use, clean the steam outlet with a damp cloth and release steam for a short time to eliminate the
small residue of milk that may have built up in the tube.
(Remove the tip of the steam pipe for easier cleaning).
♦
Daily
♦
Before use or after several hours of inactivity:
Drain:
- for each unit and water outlet, 0.5 litre of water.
- for each steam outlet, steam for 1 minute.
“BEFORE PREPARING A DRINK”
♦
After the service
- Take the 2-cup filter holder cup.
- Place the rubber plug (Ref. DO-197) inside the filter.
Rinse the decompression circuit:
- Engage the cup onto the unit by tightening it.
- Press a coffee key to pressurise the cup, and then stop the unit. Repeat the operation several times by
emptying the water contained in the cup each time.
Rinsing of the cup seal:
- Engage the cup onto the unit without tightening it.
- Press a coffee key by tightening and loosening the cup alternately, to create a leak at the level of the seal.
♦
Weekly
♦
Filter holder cup
Clean the filter holder cups and filters (by removing the filter from the cup) with detergent.
♦
Basin
Remove the basin - top of basin assembly, and clean each component in your sink.
♦
Bodywork
Use a soft cloth and alcohol for the parts in stainless steel, and non-abrasive detergent for the painted parts.
