Wall Air-Conditioner
REMOTE CONTROL – PUSHBUTTONS AND MAIN FUNCTIONS
1
It is used to switch the conditioner on and off.
When the remote control is on, the message
OPER
appears on
the display.
Selection of working mode as to the sequence:
(AUTOMATIC WORKING)
(COOLING)
(DEHUMIDIFICATION)
(FAN)
(HEATING)
The two pushbuttons set the wished temperature between
16° C and 30° C.
The temperature raises or decreases by pr or - res-
pectively.
Selection of fan speed as to the sequence:
AUTO FAN
(automatic)
FAN
(low)
FAN
(middle)
FAN
(high)
Activation or deactivation of the movement of the “Flaps”.
It activates the function “SLEEP”.
This function automatically adjusts the temperature to opti-
mize the climate of the room making it comfortable during
the night sleep and thus favouring the saving of energy.
Timed start/stop programming.
Selection of cool mode directly.
Selection of heat mode directly.
Selection of turbo mode.
Selection of blow mode, anti-mould.
Display lighting.
-
+
ON/OFF
MODE
SWING
FAN
The remote control has been designed for an easy and fast use.
USE OF THE REMOTE CONTROL
1. Direct the remote control toward the conditioner.
2. Check that there are no objects between the remote control
and the receiver on the conditioner.
3. The signal of the remote control can be sent from a max.
distance of 10 mt.
4. Never leave the remote control exposed to the rays of the
sun
N.B.The unit confirms the correct reception of each pushbutton with a beep.
5
ON/OFF
MODE
COOL
HEAT
FAN
SWING
+
BLOW
TIMER
°
C
%
AIR HEALTH BLOW
HUMIDITY
FILTER
TURBO
LIGHT
FAN
AUTO
HOUR
ON/OFF
OPER
LIGHT
SLEEP
TURBO
ON/OFF
MODE
COOL
HEAT
FAN
SWING
+
BLOW
TIMER
°
C
%
AIR HEALTH BLOW
HUMIDITY
FILTER
TURBO
LIGHT
FAN
AUTO
HOUR
ON/OFF
OPER
LIGHT
SLEEP
TURBO
TURBO
BLOW
LIGHT
SLEEP
TIMER
COOL
HEAT
