17
7.11 End of season cleaning
At the end of the season when the stove is no longer used, a more thorough and general cleaning is recommended:
• Remove all the pellets from the tank and from the screw;
• Thoroughly clean the brazier, the brazier support, the combustion chamber and the ash pan.
If the previous points have been observed, the stove will only require a check. The exhaust pipe or the flue must be
cleaned more thoroughly and the conditions of the basket checked: if needed, order it from the Authorised Service
Centre. If necessary, lubricate the hinges of the door and of the handle. Also check the ceramic fibre cord near the
glass on the inner part of the door: if worn or excessively dry, order it from the Authorised Service Centre.
8.0 Replacing parts
8.1 Replacing the glass
The stove is equipped with a 4 mm thick ceramic glass, resistant to a thermal shock of 750°C; it can only be
broken by a strong blow or improper use.
Do not slam the door and do not hit the glass.
Should the glass break, only replace it with an original spare part supplied by the Authorised Service Centre.
Fig. 10: replacing remote control batteries
8.2 Changing remote control battery
When changing the batteries (not supplied), remove the
rear cover of the remote control, making leverage with a
small flat head screwdriver (Fig. 10).
Replace the battery with a new “N” type (12V) battery, be
-
ing careful not to swap the poles (battery type and poles are
however written on the plastic part of the remote control).
If the problem persists, contact the Authorised Service
Centre.
9.0 Yearly maintenance by Service Centre
These operations must be programmed yearly by the Authorised Service Centre and are necessary to keep the
product in proper working order guaranteeing its safety.
• Thorough cleaning of combustion chamber;
• Cleaning and inspection of flue gas exhaust pipe;
• Checking sealing of gaskets;
• Cleaning mechanisms and moving parts (motors and fans);
• Checking electric part and electronic components.
!
Cleaning after 900 hours or yearly
It is mandatory to clean the stove completely whenever 900 hours of operation are reached
(or at least once a year).
To check the working hours on the display, proceed as follows:
- press the SET key 5 times in a row until you reach parameter UT04, use the temperature
increase/decrease keys to scroll to 01 and confirm once again by pressing the SET key. The
text “Par” appears on the upper display and the actual working hours on the lower one.
- The working hours menu is exited automatically when the menu remains untouched for a
few seconds.
