background image

3

Installation Instructions

Technical Features

General information

Maintenance instructions

ENGLISH

2  TECHNICAL FEATURES AND DIMENSIONS ................................................................................................................10

   2.1 

Technical features ....................................................................................................................................................10

   2.2  Main components view and dimensions

 ..................................................................................................................10

   2.3 

Dimension ................................................................................................................................................................11

   2.4  Available flow rate / pressure diagram

 .....................................................................................................................12

   2.5 

Operation  data .........................................................................................................................................................13

    

2.5.1 Data ErP directive

 ...........................................................................................................................................14

  

4  MAINTENANCE INSTRUCTIONS ...................................................................................................................................31

   4.1 

Inspection and maintenance instructions .................................................................................................................31

   4.3  Adaptation to the use of other gas  ..........................................................................................................................33

   4.4  Operation parameters programming ........................................................................................................................34  

  4.5  Wiring diagram .........................................................................................................................................................36

   4.6 

Error  codes ..............................................................................................................................................................38

3  INSTALLATION INSTRUCTIONS ....................................................................................................................................15

   3.1 

General warnings .....................................................................................................................................................15

   3.2 

Installation  standards ...............................................................................................................................................15

   3.3  Preventive system verification and adjustment operations

 ......................................................................................15

   3.4 

Packaging ................................................................................................................................................................16  

  3.5  Positioning the boiler................................................................................................................................................17

   3.6  Flue gas exhaust pipe connection ...........................................................................................................................18

   3.7 

Connections .............................................................................................................................................................19

   3.8  Filling the system .....................................................................................................................................................20

   3.9 

Electrical  connections ..............................................................................................................................................22

   3.10  Commissioning .....................................................................................................................................................   27

   3.11  Measurement of combustion efficiency during installation

 .......................................................................................28

    

3.11.1  Calibration function activation

 ....................................................................................................................28

    

3.11.2  Probes  positioning .....................................................................................................................................29

   3.12  Burner adjustment

....................................................................................................................................................29

    

1  GENERAL INFORMATION.................................................................................................................................................4

   1.1 

General warnings .......................................................................................................................................................4

   1.2  Symbols used in the manual ......................................................................................................................................5

   1.3  Appropriate use of appliance .....................................................................................................................................5

   1.4  Information for system manager ................................................................................................................................5

   1.5 

Safety  warnings .........................................................................................................................................................6 

   1.6  Technical data plate  ..................................................................................................................................................7

   1.7 

Water  treatment .........................................................................................................................................................8

   1.8  Boiler antifreeze protection ........................................................................................................................................9

Attention: this manual contains instructions for the exclusive use of the professionally qualified installer and/or maintenance 

technician in compliance with current legislation.

The user is NOT qualified to intervene on the boiler.

The manufacturer will not be held liable in case of damage to persons, animals or objects resulting from failure to comply with 

the instructions contained in the manuals supplied with the boiler.   

Summary of Contents for ALKON 100 EXT









































Reviews: