background image

16

Instruction for the installer

4

INSTRUCTIONSFOR THE  USER

4.1 - PANEL  BOARD

A =

Seasonal selector

B =

Temperature display

B

C

A

D

3.11 - INITIAL LIGHTING

Preliminary checks

Before the initial lighting of the water heater it
is suggested to check:

-

the installation is in conformity with the relevant applica-
ble standards;

-

the coaxial duct for the air intake and smoke evacuation is
properly fitted;

-

gas feeding pipe properly sized for the flow rate neces-
sary to the appliance;

-

the feeding gas cock is turned on;

-

the soundness of the gas supply;

-

the external main switch is turned on; '

-

the outlet of the safety valve “D” is connected to the swage.

-

there are no water leaks;

-

the ventilation conditions and the minimum clearances,
for the completion of the service operation, when the ap-
pliance is fitted in between the cabinets or in a capboard,
are guaranteed.

C =

Water flow rate adjuster

D =

Flame output adjuster

Informations to be passed on to the user

The user must be instructed on the use and operation of
his water heater and in particular:

Hand over to the end user this manual, as well as all the
other literature relative to the appliance and placed in the
envelope contained in the packaging.

 

     The user must retain this literature for any future

reference.

     Remind the user that in order to comply to the

      regulations in force the water heater has to be inspected
      and serviced regularly as indicated by the manufacturer.

Explain and demonstrate to the user the correct tempera-
ture adjustment for the economic use of the appliance.

Remember, that in compliance with regulation, control and
maintenance must be performed in accordance with the
requirements and the frequency specified by the manu-
facturer and with the frequency required by the directives
of the law.

If the appliance is sold or transferred to another owner or
if the present user moves home and leaves the appliance

      

installed, ensure yourself that the manual always follows

      the appliance so that it can be consulted by the new
      owner and/or installer.

Summary of Contents for IDRONIK TN 14





















Reviews: