Unical KON 100, Installation And Servicing Manual

4

1

GENERAL INFORMATION

Any product repairs must be performed solely by 

personnel authorised by Unical, using original spare 

parts only

.  Failure  to  comply  with  the  above  can 

compromise  the  safety  of  the  appliance  and  void 

the warranty. 

To  guarantee  appliance  efficiency  and  its  correct 

operation, yearly maintenance must be performed 

by qualified personnel. 

Should you decide not to use the appliance, parts 

entailing potential sources of hazard must be made 

safe. 

Before commissioning an appliance that has not 

been used, wash the domestic hot water production 

system, making the water flow until it has been fully 

replaced.  

Should the appliance be sold or transferred to a new 

owner or if you move and leave the appliance, always 

make sure that the instruction booklet accompanies 

it in order to be consulted by the new owner and/or 

installer. 

Only original accessories must be used for all appli-

ances with optionals or kits (including electric). 

This appliance is intended solely for the use for which 

it was expressly designed. 

Any other use is to be considered improper and 

therefore dangerous (*).

1.1 -  GENERAL wARNINGS

The instruction booklet is an integral and essential 

part of the product and must be kept by the user. 

Read the warnings contained in this instruction 

booklet carefully as they provide important guidelines 

regarding installation, use and maintenance safety. 

Keep the booklet with care for further consultation. 

Your appliance must be installed and serviced in 

compliance with the standards in force according 

to the manufacturer instructions, up to standard 

and by legally qualified and certified personnel. 

Systems for the production of domestic hot wa-

ter MUST be constructed entirely with compliant 

materials.

By professionally qualified personnel we mean: 

personnel with specific technical skill in the field 

of heating system components for civil use, do-

mestic hot water production and maintenance. 

Personnel must have the qualifications provided 

for by current legislation. 

Incorrect installation or improper maintenance 

can cause damage to persons, animals or objects 

for which the manufacturer is not responsible.

Before performing any cleaning or maintenance, 

disconnect the appliance from the energy mains by 

acting on the switch of the system and/or through 

the specific cut-off devices. 

Do not obstruct the terminals of the intake/exhaust 

ducts. 

In the event of failure and/or malfunctioning of the 

appliance, switch it off and do not try to repair it or 

intervene on it directly. Contact only personnel qual

-

ified in compliance with law.