11
ANSA Relax Instruction & Safety Manual
T
08 9351 7500
E
info@unicarehealth.com.au
W
www.unicarehealth.com.au
Footrests
Footrest and footrest interlock
The footrest can be swung outwards. When fi tting the footrests these
are installed in the swungaway position. Then simply turn them inwards
until the interlock engages (1). To remove the footrests, use the lever
(2) and swing the footrest outwards and lift off . Check that the footrest
is correctly engaged.
CAUTION!
The footrests are not designed to be used to lift or carry the wheelchairs
with an occupant.
Standard fl ip-up footrest
To fl ip up:
Take the load off the footrest and release the hand wheel (1). Pull the
footrest upwards and set the desire height. Secure at the desired height
by tightening the hand wheel.
To lower:
Take the load off the footrest by lifting the lower leg and release the
interlock with the hand wheel (1). In this way you can swing the footrest
downwards. As soon as you have reached the desired position, secure
the interlock with the hand wheel. You can set the lower leg length by
releasing the screws (2), this is infi nitely adjustable.
CAUTION! Risk of injury!
When moving the footrest up or down, do not put your fi ngers in the adjusting mechanism between the
moving parts of the footrest.
CAUTION!
The footrests are not designed to be used to lift or carry the wheelchairs with an occupant.
