9
WiFi Phone(U-Phone)
User
’
s Manual
Figure 1.3.2.1 WIFI PHONE on the desktop charger
1.4 Powering the WIFI PHONE On and Off
Press and hold the Power On/Off key for approximately 2.5 seconds to
turn the WIFI PHONE on or off.
1.5 Main Screen
After powering on, the phone enters standby mode, with the main screen
displayed, as shown in Figure 1.4.1
Figure 1.4.1 Main Screen at Standby mode
1
Battery icon
2
User name
3
Right soft key tab
4
Left soft key tab
5
Entering
/
Information line:
i)
Entering phone number/SIP URL here or
ii)
showing information at standby mode, using
▲
to switch between
WLAN SSID and current IP address information
6
Signal strength icon
7
Registration status indicator: when SIP registration is enabled, the
capital
R
indicates WIFI PHONE has registered to the SIP Registrar
successfully. If WIFI PHONE fails to register to the SIP Registrar, a
capital
U
will appear. A cross sign (X) means the user name or
password is incorrect. A rotating line indicates the registration is in
progress.
R 08:30
user
WLAN Ready
Menu
PhBook
4
5
2
3
6
1
7
8
