11
7.2 First Access to KLE-Z Web Management
The factory default network settings for the KLE-Z are as follows:
■
IPv4 Address:
192.168.1.200
■
Subnet Mask:
255.255.255.0
■
Default Gateway:
192.168.1.254
■
DNS Servers:
192.168.1.254
The default access IP address to enter the
KLE-Z Web Management
:
■
https://192.168.1.200:
5908
(*The exemplary port number 5908 here is based on a TCP Port Base 5900 plus 8; please refer to the
subsection 7.3.1
Configuring the TCP Port Base
)
The default User name and Password for the System Administrator are:
■
User name:
superuser
■
Password:
superu
1. Log in the
KLE-Z Web Management
at its default IP address https://192.168.1.200:5908 using your
computer web browser. If you failed to access the
KLE-Z Web Management
at this address, it might be
possibly this default IP address has been occupied by another device. Please use
KCenter
or
Getipdev
application (refer to the support CD) to find out an available IP address for the KLE-Z. Then use that IP
address followed by a port number (Refer to the subsection 7.3.1
Configuring the TCP Port Base
) to
enter the
KLE-Z Web Management
.
2. Alternatively, you can also build an isolated network, without connecting it to LAN or Internet,
simply between the KLE-Z and a computer via a Cat.5/6 cable. Set up an IP address for the computer
that is in the same network segment as the KLE-Z such as
192.168.1
.xxx, then enter the
KLE-Z Web
Management
at its default access IP address https://192.168.1.200:5908
* When you first access the
KLE-Z Web Management
, your browser may prompt a security warning message. Please choose
"Continue to this website" since there is no risk of pirate website here. These warnings are not relevant for the HTTPS server
of the KLE-Z unit. However, you can install a Root certificate of the KLE-Z in the list of trusted CA (Certificate Authority) if you
want to permanently remove this warning message. (Refer to more details in the chapter
XI. Troubleshooting
)
