4
T
hank you for purchasing our KLE-Z IP-based KVM Switch Console. We recommend that you read this
manual thoroughly and retain it for future reference.
I. Introduction
The KLE-Z is the latest generation of IP-based KVM Switch Console for remote Server/KVM switch
management. It allows remote management of Server(s) or KVM switch(es) over the Internet/LAN. In
addition to supports for secured access via 1024-bit PKI authentication, 256-bit SSL data encryption,
LDAP, RADIUS, and Active Directory authentication, it has virtualization of ISO file that allows accessing of
remote drive to help manage server. Moreover, it builds in a 2-port Ethernet hub which means while one
port is connected to the network, the other one can still be used by another Ethernet device, such as a
PC, to connected to the network as well.
The KLE-Z provides a solid, reliable, and physical extension of keyboard, mouse, and video to nearly
unlimited distance. It supports for both analog and digital videos through its DVI-I connector. Using two
passive DVI-to-VGA video adapters implements VGA signal transmission from the system (VGA PC) end
to the console (VGA Monitor) end.
The KLE-Z's gives users a complete control from PC's pre-boot stage such as BIOS-level CMOS setting
with its USB interface. It even realizes a remote Power ON/OFF control to its attached PC/Server with an
external PDU(Power Distribution Unit). With properly planning the KVM infrastructure with the virtual
media, users can even reinstall a new operating system at any server connected to the KLE-Z, feeling free
and confident while remotely accessing the local attached system.
II. Features
■
Fully functional IP-based remote control solution for server management
■
High video-over-IP refresh rate up to 30fps
■
DVI/VGA videos, keyboard and mouse extension over the Internet
■
Up to 1920 x 1200 resolution video output
■
Supports virtual media and ISO file mapping
■
Supports power management interface with an external PDU.
■
Built-in 2-port Ethernet Hub
