IRELESS ROUTER CONFIGURATION
st, make sure that the network connections are functioning normally.
e WEP-72104G-1 can be configured using Internet Explorer 4.0 or newer web browser versions
ogin to the Wireless Router through WLAN
fore configuring the Wireless Router through WLAN, make sure that the SSID, Channel, an
EP are set properly.
e default setting of the Wireless Router:
SSID: default
Channel: 6
Security: disable
ogin to the Wireless Router through LAN
fore you configure this device, note that when the Wireless Router is configured through an Eth
nnection, the host computer must be set on an
IP subnetwork
that can be accessed b
DSL/Cable modem. For example, when the default network address of the xDSL/Cable m
hernet interface is 192.168.1.x, then the host computer should be set at 192.168.1.xxx (where xx
mber between 2 and 254) and the default subnet mask is 255.255.255.0.
sing the Web Browser
Open your Internet browser.
Enter IP address
http://192.168.1.1
(the factory-default IP address setting) to the URL web addr
location.
When the following dialog box appears, enter the user name and password to login to the main
configuration window, the default username and password is “
admin
”.
ote
: To set a password, refer to the "Main Page Password Setting".
