5
uSTAR application package
Qualified antenna, support GPS L1 and BDS B1
Antenna connection cable
Direct serial cable and USB
PC or Laptop with serial ports (Windows 2000/XP/Win7
）
Please keep the box and anti-static plastic bags for storage and handling
2.2
Hardware Installation
After the above preparation is complete, follow the steps below to install:
Step 1: Make sure to make full anti-static measures, such as anti-static wrist strap, grounding the
workbench;
Step 2: Open the UM220-INS NF evaluation kit;
Step 3: Select the GNSS antenna with appropriate gain, fix it in the non-block area, using the
appropriate cable to connect the antenna with UM220 EVK;
Step 4: Connect the PC to the EVK serial port through direct serial cable;
Step 5: Power supply for UM220-INS initialization;
Step 6: Open the uSTAR software on the PC;
Step 7: Controlled the receiver through uSTAR to display constellations view, log messages, and
receiver status.
