UM960L User Manual (Raw Data)
UC-00-M47 EN R1.0
Introduction
1
1
Introduction
UM960L is a new generation of GNSS high precision positioning module from Unicore. It
supports all constellations and multiple frequencies, and can simultaneously track GPS
L1/L2/L5 + BDS B1I/B2I/B3I/B1C/B2a + GLONASS L1/L2+Galileo E1/E5a/E5b + QZSS
L1/L2/L5. The module is mainly used in geological hazard monitoring, deformation
monitoring, and high precision GIS.
UM960L is based on Nebulas
Ⅳ
TM
, a GNSS SoC which integrates RF-baseband and high
precision algorithms. Besides, the SoC integrates a 2 GHz dual CPU, a high speed
floating point processor and a co-processor with 22 nm low power design, and it
supports 1408 super channels. All these above enable stronger signal processing.
UM960L features a compact size of 16.0 mm
× 12.2 mm
. It adopts SMT pads, supports
standard pick-and-place, and supports fully automated integration of reflow soldering.
Furthermore, UM960L supports interfaces such as UART, I
2
C
, which meets the
customers’ needs in different applications.
Figure 1-1 UM960L Module
Reserved interface, not supported currently.
