ENDAT-AJ01 USERS MANUAL
UNICORN COMPUTER CORP.
32
Appendix A: FLASH MEMORY UTILITY
Using this package to update the system BIOS from a disk file to the on board Flash
memory. Be aware any improper update of the system BIOS will cause the
malfunction of the system.
Method of update BIOS:
1. Please contact one of the Sales Representative on behalf of Unicorn to
acquire “BIOS update package”, and process following procedures for the
BIOS UPDATE.
2. Prepare a bootable storage that can boot under MS-DOS, (such as HDD,
USB sticker…etc)
3. Unzip “BIOS Update package” into the bootable storage.
4. Run the Flash file.
5. Once the BIOS is Flash successfully, Reboot the system.
6. Press <F2> to enter BIOS Setup, Load BIOS setup default <F9>, save
BIOS default and exit <F10>.
* Please turn off system and clear CMOS data by JBAT1.
* Please restart your system and load setup default.
Driver Utility Installation Guide
When finishing the installation of Microsoft Windows please install the relative AMD
All in one (chipsets, display)
、
LAN and AUDIO driver manually for compliance
compatibility of hardware environment.
Please contact sales department of UNICORN for Embedded OS user driver
(Linux, Windows Embedded). All of embedded OS driver is not be included in any
versions of driver CD-ROM from UNICORN.
Please download or check from AMD Web site:
www.amd.com
for more information
or last versions of driver as needs!