The instructions which follow this term indicate situations where failure to follow
the instructions will almost certainly result in death or severe injury.
The instructions which follow this term indicate situations where failure to
follow the instructions could cause injury when using the machine or
physical damage to equipment and surroundings.
SAFETY INSTRUCTIONS
This instruction manual and the indications and symbols that are used on the machine itself are
provided in order to ensure safe operation of this machine and to prevent accidents and injury
to yourself or other people. the meanings of these indications are given below.
Indications
Symbols
----------- This symbol(△) indicates something that you should be careful of.
The picture inside the triangle indicates the nature of the caution
that must be taken.
(For example, the symbol at left means "beware of injury")
----------- This symbol(○
＼) indicates something that you must not do.
----------- This symbol(●) indicates something that you must do.
The picture inside the circle indicates the nature of the thing
that must be done.
( For example, the symbol at left means"you must make the ground
connection". )
INSTRUCTION MANUAL
★ Thank you very much for buying a UNICORN sewing machine. Before using your new machine,
please read there safety instructions together with the separate instruction manual for the machine.
With industrial sewing machines, it is normal to carry out work while positioned directly in front of
moving parts such as the needle and thread take-up lever, and consequently there is always a
danger of injury that can be caused by these parts. Follow the instructions from training personnel
and instructions regarding safe and correct operation before operating the machine so that you will
know how to use it correctly
★ Please keep this manual within easy reach for quick reference.
ꍽ
Safety indications and their meanings
Summary of Contents for DT6-H892?3
Page 2: ......
Page 4: ...5 off A S 31 2 40 25 OFF A S A S...
Page 32: ...22 10 1 13 19 2 9 16 16 20 16 3 13 19 4 19 13...
