background image

8

K-Series | Version 1.03

Operation

The delivery packaging is made of cardboard, so 
please dispose carefully by having it chopped up and 
given to the recycling collection.

The film is made of polyethylene (PE) and the cushioned 
parts of polystyrene (PS). Deliver these substances to a 
collection point for recyclable materials or to the waste 
disposal company which looks after your region.

5.3 Storage

The chain hoist should be lubricated and then stored in 
a dry, frost-free environment. Do not set anything down 
on the chain hoist. 

Images in this consumer information can be from the original 
deviate.

Fig. 2: Decription of the device

1.

Hook

2. Chain housing with the deflection pulley
3. Load chain
4. Hand chain
5. Safety look 
6. Load hook

All work involved in commissioning the chain hoist may 
only be carried out by licensed specialists.

Furthermore, all functions of the chain hoist must be 
checked prior to initial commissioning.

6

Operation

NOTE!

The hand chain is 500 mm shorter then the load 
chain.

2

4

1

5

3

6

DANGER!
Danger of life by crashing the load!

Falling loads can cause serious injury or death. 
-  Overload is vorbidden! Check that the load never 

exceeds the maximum load stated on the name-
plate.

-  Never rock the lifted load.

-  Never stand, linger or work below a suspended load!

-  Under no circumstances may a load be subjected 

to a heavy blow or collision.

-  Make sure that the stopper on the chain hoist is 

mounted and has sufficient load capacity to hold 
the load.

-  Never lift a load with the chain hoist, which will slip 

off, fall off or whose parts are not firmly connected.

-   A rusted or damaged Chain Hoist must never be 

used.

-   A load lifted by the chain hoist should not be left 

unattended.

-  Care should be taken during lifting or lowering that 

the operator does not stand within the working 
range of the load.

DANGER!
Danger of life by crashing the load!

-  Unsuitable attachment points may fail and the load 

may fall. 

-  Only attach to the load at suitable attachment 

points. 

CAUTION!
Risk of property damage and personal 

injury!

If a defective chain hoist is used, it may fail and injure 
persons.

-  Before each use, check the chain hoist for obvious 

defects. 

-  Do not use the chain hoist if there are obvious de-

fects.

-  Repair defects or have them repaired. 

Head protection must be worn!

Wear protective gloves!

Summary of Contents for 6171001



















Reviews: