background image

12

PK 1 | Version 1.03

Spare parts

12 Spare parts

12.1 Ordering spare parts

The spare parts may be purchased with the authorised 
dealer or directly with the manufacturer. Please find the 
corresponding contact data in Chapter 1.2 Customer 
service.

Indicate the following basic information for requests or 
orders of spare parts:

- Type of device
- Item No.
- Position No.
- Year of construction:
- Quantity
- Required mode of dispatch (mail, freight, sea, air, 
express)
- Address of dispatch

Spare part orders which do not include the above indi-
cations may not be taken into consideration. If the indi-
cations regarding the mode of dispatch are missing, the 
product is dispatched at the discretion of the supplier. 

You will find information regarding the device type, item 
No. and year of manufacture on the type plate fixed to 
the Mobile gantry crane.

Example

The castor for the gantry crane PK1 must be ordered. 
The castor has the number 27 in the spare parts dra-
wing 1.

By ordering spare parts, send a copy of the spare parts 
drawing (1) with the marked part (castor) and marked 
positon number (27) to the dealer or spare parts depart-
ment and provide the following information:

- Type of device: Gantry crane 

PK 1

- Item number: 

6172100

- Drawing number: 

1

- Position number:  

27

DANGER!
Danger of injury by the use of wrong spare 

parts!

Dangers may result for the user and damages as 
well as malfunctions may be caused by using wrong 
or damaged spare parts.
-  Only use original spare parts of the manufacturer or 

spare parts admitted by the manufacturer.

-  Always contact the manufacturer in case of uncer-

tainties.

Tips and recommendations

The manufacturer's warranty will become null and 
void if non-permissible spare parts are used  

Summary of Contents for 6172100

















Reviews: